Posted February 14, 2026
Heavy Equipment Mechanic (UME), Fort Bliss TX
Technica LLC
El Paso, TX 79916, United States
Full Time
Reference: Technica LLC_1703945
Technica LLC seeks to recruit for the position of Heavy Equipment Mechanic on a Government contract with a place of performance at Fort Bliss, TX. This...
Technica LLC seeks to recruit for the position of Heavy Equipment Mechanic on a Government contract with a place of performance at Fort Bliss, TX. This position is full-time but temporary. Anticipated period of performance ending 3 October 2026.
Position Responsibilities:
- This position works on a wide range of civilian vehicles such as light and heavy trucks, forklifts and U.S. military vehicles, their associated trailers and MHE systems such as but not limited to: the newly inducted Joint Light Tactical Vehicles (JLTVs), High Mobility Multipurpose Wheeled Vehicles (HMMWVs), Palletized Load Systems (PLSs), Light Medium Tactical Vehicles (LMTVs), Medium Tactical Vehicle (MTVs), High Mobility Engineer Excavator Type I (HMEE-I), 120M Motor Graders and D7RII Mine Clearing Armor Protection Vehicles (MCAs). Rough Terrain Container Handler (RTCH). Work is performed both indoors and outdoors.
- Use applicable references, Army Technical Manuals (EMS/IADS), inspecting, troubleshooting, servicing, repairing, replacement, adjusting and testing of vehicles, MHE systems, subsystems and components such as power plant/packs, compression ignition engines and engine fuel systems, air induction and exhaust systems and cooling systems. Vehicle chassis and powertrain components including, frame cross members, clutches assemblies, transmissions, transfers, final drives, propeller shaft assemblies, brake systems, steering systems, suspensions systems, fifth wheel assemblies, wheeled vehicle crane, hoist and winch assemblies, and hydraulic systems.
- Performs scheduled maintenance checks and adjustments on such things as fluid levels, hoses, belts, brakes, tires, and clutches, speed tandem drive axles with air or electric shift, hydrostatic driven, heavy duty multi-axle suspensions, both conventional steel or air springs; changes filters and oil and lubricates vehicles and motor driven equipment. Performs other tasks as assigned by the assistant supervisor or lead.
- Inspect, troubleshoot and repair, very complex wiring systems, hydraulics, transmissions, engines, air and hydraulic brakes systems.
- Applies advanced technical knowledge to solve unusually complex problems that typically cannot be solved solely by referencing manufacturers manuals or similar documents.
- Utilizes hand tools, diagnostic tools, complex computers systems for advanced
- Operates materiel handling equipment (MHE) as
- Performing other duties assigned by the Assistant Supervisor or Lead
Minimum Requirements:
- Must have at least 3 years of related experience.
- Must Demonstrate a good working knowledge of maintenance programs, policies, nomenclature, work methods, manuals, or other established guidelines.
- Must be able to pass pre-employment drug screen and background checks related to the position.
- Valid state issued driver license.
- High school diploma or equivalent
- Must be a US Citizen or US permanent resident for more than 3 years.
- Able to function with a basic level of English oral and written language skills.
- Must be able to work in all types of weather conditions to include intense heat, heavy wind, blowing sand, heavy rain, sleet and snow.
- Must be able to stand or sit for prolonged periods of time.
- Able to pick up and move items within a 49 lbs. restriction with a frequent or constant lifting of 40 lbs.
- Able to climb in and out of military vehicles and related equipment.
- Capable of climbing and working on equipment at 10 feet above ground limit.
- Capable of using and understanding Personal Protective Equipment (PPE).
- Able to work past normal hours as mission dictates.
- Prior military experience in Military Occupational Skill (MOS) 63B, 63S, 63D or
- Defense contracting experience inspecting and ordering repair parts for military
- Must be able to pass pre-employment drug screening and background checks related to the position.
This listing expired on Mar 16. Applications are no longer accepted.
Below are some other jobs we think you might be interested in.
-
Heavy Equipment Mechanic QC Lead, Fort Bliss, TX
- TECHNICA LLC
- El Paso, TX 79916, United States
Technica LLC seeks to recruit for the position of Heavy Equipment Mechanic QC Lead Inspector on a Government contract with a place of performance at...May 13 -
Commercial Appliance Mechanic, Fort Bliss, TX
- TECHNICA LLC
- El Paso, TX 79916, United States
Technica LLC seeks to recruit for the position of Appliance Mechanic on a Government contract with a place of performance at Fort Bliss, TX. Position...May 30 -
Heavy Equipment Mechanic, White Sands, NM
- TECHNICA LLC
- White Sands, NM 88002, United States
Technica LLC seeks to hire a Heavy Equipment Mechanic on a Government contract supporting the White Sands Test Center (WSTC) mission at WSMR, NM. ...May 13 -
A&P Mechanic IV
- Sierra Nevada Corporation
- Fort Bliss, TX, United States
Are you a highly skilled mechanic ready to take your aviation career to next level? Join our team! As an A&P Mechanic IV, you will supervise maintenance...May 23 -
Electrical Assembly
- RTX
- fort bliss, TX 79906, United States
Date Posted: 2026-05-18 Country: United States of America Location: US-TX-FORT BLISS-11005-CUST 11005 Fort Bliss BLDG 11005 (External Site) Position...May 20 -
Assembler I - 1st Shift
- Eaton Aerospace
- El Paso, TX, United States
Eaton's ES AMER ARS PDCAD division is currently seeking a Assembler I - 1st Shift. The hourly rate for this position is $16.76 per hour. The hours for...May 22 -
O1-12989 - Assembler 1, General
- Becton, Dickinson and Company
- El Paso, TX, United States
We are the people who give possibilities purpose BD is one of the largest global medical technology companies in the world. Advancing the world of...May 30 -
Specialist 1, Quality Control
- Becton, Dickinson and Company
- El Paso, TX, United States
We are the people who give possibilities purpose BD is one of the largest global medical technology companies in the world. Advancing the world of...Jun 04 -
Fabrication Technician - Machine Programmer
- Eaton Aerospace
- El Paso, TX, United States
$23.92 HourlyEaton's ES AMER ARS division is currently seeking a Fabrication Technician - Machine Programmer. The core hours are 7:00am to 3:45pm. The hourly rate...May 29 -
Fabrication Technician - 2nd Shift
- Eaton Aerospace
- El Paso, TX, United States
Eaton's ES AMER ARS division is currently seeking a Fabrication Technician - 2nd Shift. The core hours are Monday through Friday from 4:00pm to 12:45am....May 13 -
Fabrication Technician 1st Shift
- Eaton Aerospace
- El Paso, TX, United States
$23.92 HourlyEaton's ES AMER ARS division is currently seeking a Fabrication Technician 1st Shift. The core hours are Monday through Friday from 7:00 am - 3:45 pm....May 13 -
Sr. Director, Operations Quality Management
- Becton, Dickinson and Company
- El Paso, TX, United States
We are the people who give possibilities purpose BD is one of the largest global medical technology companies in the world. Advancing the world of...Jun 07 -
Security Operations QA
- Amentum
- El Paso, TX 79925-1064, United States
Amentum, a large government contract company, is seeking Security Operations Quality Assurance (QA) to support the WEXMAC Camp East Montana contract in...Jun 05 -
Fabrication Associate II
- Schneider Electric
- El Paso, TX, United States
2nd Shift Role - Differential Pay $1.25 per hour POSITION SUMMARY: This position is responsible for the forming, cutting, sharpening, piercing,...Jun 05 -
Manufacturing Engineering Supervisor
- Schneider Electric
- El Paso, TX, United States
We are seeking a motivated and experienced Manufacturing Engineering Supervisor to lead our engineering team. This role involves overseeing...May 28 -
PEX Manufacturing Engineer
- Schneider Electric
- El Paso, TX, United States
The PEX Method Engineer Ensures products are fully prepared production by building, validating, and optimizing all digital manufacturing data within...May 16 -
Manufacturing Engineer
- Schneider Electric
- El Paso, TX, United States
Are you a Manufacturing Engineer with a deep understanding of the intricacies of production processes? We're seeking a Manufacturing Engineer who's...May 28 -
Journeyman Electrician
- RK Industries, LLC
- Santa Teresa, NM, United States
Description Put your licensed trade skills to work on high-impact projects as a Journeyman or Master Journeyman. In this role, you'll lead and perform...Jun 04 -
Construction Manager, Lead
- BOOZ, ALLEN & HAMILTON, INC.
- White Sands Missle Base, NM, United States
$99,000 to $225,000 AnnuallyConstruction Manager, Lead The Opportunity : As a facilities professional, you understand that relationship-building and keen attention to detail is...May 31
